MC Rurnet by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 74% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 74.
Tone for oscillator 2 is set to 82 and is modulated by LFO 2.
LFO 2 mod-matrix 1 modulation amount for tone for oscillator 2 is 127.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 127.
Noise timbre
Noise level is set to 55 and is modulated by Ctrl Seq.
Ctrl Seq mod-matrix 2 modulation amount for Noise level is 50.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 5 modulation amount for high-pass filter cut-off frequency is 53.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 335.36Hz (81) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 95.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 111.
Filter resonance is statically set to 42% (107).
Oscillator drift & unison detuning timbre
Unison detune level is set to ±10 cents (53) and is modulated by Ctrl Seq.
Ctrl Seq mod-matrix 3 modulation amount for unison detune level is 65.
Oscillators drift level is off.
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 12 semitones and is modulated by Mod Wheel.
Mod Wheel mod-matrix 7 modulation amount for oscillator 2 pitch is 19.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Multi-Band Distortion fx
not yet complete
Rich Plate Reverb fx
not yet complete
Noise Gate fx
not yet complete
Delay fx
not yet complete
Mod Wheel modulator
Controls HPF Cut-off Frequency, FX 4 Level, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | HPF Cut-off Frequency | 53 |
| fx | matrix | FX 4 Level | 127 |
| pitch | matrix | OSC 2 Pitch | 19 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 111 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 95 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 2 |
| name | value |
|---|---|
| LFO 1 Rate | 0.04Hz (0) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 1 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls OSC 2 Tone Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Tone Modulation Depth | 127 |
| name | value |
|---|---|
| LFO 2 Rate | 1.66Hz (128) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 1 |
| LFO 2 Slew Rate | 115 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.05s (8) |
| VCA Envelope Decay Time | 0s (0) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0.28s (48) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 95 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.24s (40) |
| VCF Envelope Decay Time | 1.1s (126) |
| VCF Envelope Sustain Level | 14% (37) |
| VCF Envelope Release Time | 0.31s (53) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Ctrl Seq modulator
Controls Noise Level, Unison Detune, LFO 1 Rate, OSC 1 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | Noise Level | 50 |
| timbre | matrix | Unison Detune | 65 |
| matrix | LFO 1 Rate | 127 | |
| pitch | fader-indirect | OSC 1 Pitch | 2 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | on |
| Ctrl Sequencer Clock Divider | 9 |
| Sequence Length | 6 |
| Sequencer Swing Timing | 0 |
| Key Sync & Loop | 1 |
| Slew Rate | 0 |
| Seq Step Value 1 | 130 |
| Seq Step Value 2 | 131 |
| Seq Step Value 3 | 197 |
| Seq Step Value 4 | 234 |
| Seq Step Value 5 | 128 |
| Seq Step Value 6 | 183 |